Slurry Tanker Pump
1. Compact structure, stunning appearance, proper stability, effortless to install.
2. Smooth operation The optimized double-suction impeller reduces the axial pressure to a minimum, and has a blade form with great hydraulic performance. It is precision cast, and the internal floor of the pump casing and the impeller floor are extremely smooth, with sizeable anti-cavitation overall performance and excessive efficiency.
3. The bearing ensures clean operation, low noise and lengthy provider life.
4. Shaft seal Mechanical seal or packing seal is selected. It can make sure 8000 hours of operation except leakage.
5. Installation shape No adjustment is required throughout assembly, and it can be hooked up one after the other or horizontally in accordance to the on-site use conditions.
6. The self-priming system is mounted to comprehend automated water absorption, that is, there is no want to installation a backside valve, no vacuum pump, no backflow, and the pump can be started.
The double-suction centrifugal pump realizes fluid transportation based on centrifugal force, and its core is the double-suction impeller. When the motor drives the impeller to rotate at high speed, a low-pressure area is formed in the center of the impeller. The liquid enters from both sides of the impeller (double suction port) at the same time, and is thrown to the volute by the impeller after merging, and then discharged through the outlet. This design is equivalent to two single-suction impellers of the same diameter working at the same time, and the flow rate can be doubled under the same impeller outer diameter. At the same time, due to the symmetrical structure of the impeller, the axial forces offset each other, reducing the burden on the bearings and making the pump run more smoothly.
Structural features
Horizontal split pump body: The pump body is divided into upper and lower halves horizontally along the axis, which is convenient for quick disassembly and assembly during maintenance without disassembling the pipeline.
Double-suction impeller design: significantly reduce axial force, the impeller and pump casing have excellent hydraulic models, are precision cast, have smooth inner surfaces, and have excellent anti-cavitation performance.
Double volute structure: effectively reduce radial force, reduce bearing stress, and extend bearing service life.
Shaft seal selection: mechanical seal or packing seal can be selected, and some models can ensure long-term leakage-free.
Various installation forms: no adjustment is required during assembly, and it can be installed separately or horizontally according to the on-site use conditions.
Self-priming device can be installed: automatic water absorption is achieved, no bottom valve or vacuum pump needs to be installed, and it can be started without backflow.
Application field
Water treatment industry: commonly used in water supply, water supply, circulating water system and sewage treatment, etc., and can transport clean water, sewage, seawater, cold water, etc.
Petrochemical industry: widely used in petroleum, chemical, natural gas and other industries, such as crude oil transportation or treatment of various chemical substances in refineries.
Heating and air conditioning: used to transport hot water and cooling water to maintain the temperature of buildings.
Power industry: transport cooling water to the cooling tower or cooling equipment of the power plant, and is also often used to pump water to the boiler of the thermal power plant.
Forestry and agriculture: used for irrigation, hydrological systems and water resource management in forestry, and often used to transport irrigation water in the agricultural field.
Papermaking and food industry: used to transport liquids such as pulp and food slurry.
